4 Proven Methods for Trekking Pole Attachment to Backpack — A Practical 2026 Guide

Abstract

The secure and efficient stowage of trekking poles on a backpack is a matter of practical concern for hikers, mountaineers, and travelers, influencing safety, comfort, and freedom of movement. An improper trekking pole attachment to backpack can lead to snagging on terrain, creating a significant trip hazard, or result in poles rattling or shifting, which disrupts the hiker's balance and causes auditory irritation. This guide examines the principles of effective pole stowage, focusing on stability, accessibility, and protection of the equipment. It provides a detailed analysis of four primary methods for attaching trekking poles: the classic twin loop system, quick-stow on-the-fly techniques, the A-frame carry, and the vertical side-pocket method. Each method's mechanical execution, suitability for different backpack designs and terrains, and potential drawbacks are explored. The objective is to equip the user with a comprehensive understanding, enabling them to select and apply the most appropriate technique for their specific pack, poles, and hiking context, thereby enhancing their overall outdoor experience.

Key Takeaways

• Prioritize stability to prevent poles from shifting and affecting your balance.
• Choose an attachment method based on your terrain and need for quick access.
• Regularly inspect your backpack's loops and straps for wear and tear.
• Mastering the trekking pole attachment to backpack enhances safety on the trail.
• Use compression straps to eliminate rattling and secure poles tightly.
• Store poles with tips covered and pointed down to prevent injury and gear damage.
• For packs without dedicated loops, use side pockets and compression straps.

Table of Contents

• The Foundational Importance of Proper Pole Stowage
• Anatomy of a Backpack: Understanding Your Attachment Points
• Method 1: The Classic Twin Loop System
• Method 2: The 'On-the-Fly' Quick-Stow System
• Method 3: The A-Frame Carry
• Method 4: The Vertical Side-Pocket Carry
• Improvisational Solutions for Any Pack
• Frequently Asked Questions (FAQ)
• Final Considerations on Mastery and Practice
• References

The Foundational Importance of Proper Pole Stowage

Embarking on a trail, one carries more than just gear; one carries a system of tools designed to interact with the environment. Among these, trekking poles stand out as extensions of our own limbs, offering stability on treacherous descents and propulsive power on grueling ascents. Yet, there are moments in every journey—a flat, easy meadow, a technical rock scramble requiring free hands, or simply a rest stop—when these extensions must be retracted and secured. It is in this seemingly simple act, the trekking pole attachment to backpack, that a hiker's trailcraft is often revealed. The act is not merely about storage; it is an engagement with principles of physics, ergonomics, and safety.

A poorly secured pole is a liability. Imagine it for a moment: a pole dangling loosely from your pack, its tip catching on a low-hanging branch or a rock crevice. The sudden jerk can pull you off balance, a dangerous prospect on an exposed ridge. Or consider the incessant, rhythmic clatter of unsecured poles against your pack frame—a minor annoyance that, over thousands of steps, can fray both your gear and your nerves. The goal, therefore, is to integrate the poles so completely with your pack that they become a silent, stable part of the whole, moving as one with your body.

This requires an understanding of your pack's design. A well-designed Traveler Backpack is a testament to thoughtful engineering, featuring a variety of loops, straps, and pockets. These are not decorative elements but functional interfaces. Learning to use them effectively transforms the pack from a mere container into a sophisticated carrying system. The principles we will explore apply to a wide range of carrying equipment, from large expedition packs to the more compact Chest Bag sometimes used for shorter, faster excursions. The fundamental challenge remains the same: how to neutralize the potential for unwanted movement and interference.

Comparing Attachment Methods

To help you decide which method is best for you, consider the following comparison. Each technique offers a different balance of speed, security, and compatibility.

Anatomy of a Backpack: Understanding Your Attachment Points

Before we can master the methods of attachment, we must first become fluent in the language of the backpack itself. A modern pack is a landscape of specialized features, each with a designated purpose that can often be adapted for others. Think of it as learning the geography of your most trusted piece of gear.

Key Attachment Features

Deconstructing the Features

Let's walk through these features with a more detailed eye.

Ice Axe and Trekking Pole Loops

At the very bottom of your pack, often near the front or side panels, you will likely find one or two sturdy loops of webbing. Historically, these were designed specifically for ice axes, a tool with a shape that nests neatly into the loop. Manufacturers like Xiamen youcco industrial Co.,Ltd. recognize that many users are hikers, not just mountaineers, and so these loops are now universally considered dual-purpose. For our needs, this is the primary anchor point in the classic attachment system. You will thread your poles through these loops, so their integrity is paramount.

Upper Securing Straps or Bungee Cords

Look higher up on your pack's front or side panels, roughly two-thirds of the way to the top. You should find some form of adjustable strap, often a thin webbing strap with a buckle or a "quick-release" toggle on an elastic bungee cord. This is the counterpart to the lower loop. Its function is to cinch down on the upper shaft of the poles, holding them flush against the pack and preventing them from swaying or pivoting from their anchor point in the lower loop. The elasticity of a bungee is particularly useful as it maintains constant tension.

Side Compression Straps

These are the workhorses of a pack's stability system. Typically found in pairs on each side of the pack, their main job is to shrink the pack's volume, pulling the load closer to your spine and preventing contents from shifting. For pole attachment, they are incredibly versatile. They can be used to clamp poles vertically against the side of the pack or to form the "A-Frame" carry, which we will discuss. A high-quality Traveler Backpack will have robust compression straps, a feature that distinguishes it from a simpler Laptop Bag designed for urban use.

Stretch Side Pockets

Primarily designed for water bottles, these deep, often elasticized pockets are another key feature for stowing poles. Their depth provides a secure "bucket" to drop the pole tips into, and when combined with the side compression straps, they create a very accessible and reasonably secure carrying system. The quality of the mesh or fabric is important here; it needs to be durable enough to resist abrasion from the carbide tips of your poles over time.

Understanding this anatomy is the first step. Now, let's put this knowledge into practice by examining the specific techniques for a secure trekking pole attachment to backpack.

Method 1: The Classic Twin Loop System

This method is the oldest and, for many, the most secure way to attach poles for long-term storage while hiking. It is the ideal choice when you are certain you will not need your poles for an extended period, such as during a long, flat approach to a mountain or when you are traveling to and from the trailhead. It utilizes the dedicated features designed for this very purpose: the lower loops and the upper bungee fasteners.

Step-by-Step Instructions

Let's break this down into a clear, repeatable process. First, collapse your trekking poles to their shortest possible length. This is a vital first step for any attachment method, as it minimizes their profile and reduces the chance of snagging.

1. Orient the Poles: Take one of your collapsed poles. You need to decide which way it will face. The standard and safest orientation is with the tip pointing downwards and the handle upwards. This prevents the sharp tip from being at head level for you or anyone hiking behind you. Now, flip the pole upside down. The handle should be pointing at the ground.
2. Thread the Loop: Locate one of the ice axe/trekking pole loops at the bottom of your pack. Take the handle-end of your upside-down pole and thread it through the loop from the top. Pull it through until the loop is cinched tightly around the pole just underneath the basket. The basket acts as a stopper, preventing the pole from sliding all the way through.
3. Pivot and Secure: Now, pivot the pole upwards, so it lies vertically against the face of your backpack. The tip will now be pointing towards the sky. Locate the corresponding upper bungee cord or strap. Bring this strap around the shaft of the pole and secure it tightly. If it is a bungee, pull the toggle to cinch it down. If it is a webbing strap, feed it through the buckle and pull it snug. The pole should now be held firmly against the pack at two distinct points.
4. Repeat for the Second Pole: Repeat the exact same process for the second pole on the other side of the pack. The result is a symmetrical, stable, and secure attachment.

Analysis of the Method

The elegance of the Twin Loop System lies in its use of mechanical advantage and dedicated hardware. By anchoring the poles at two widely separated points, it virtually eliminates any potential for rattling or swaying. The poles are held flush against the largest, most stable surface of the pack.

Pros:

• Unmatched Security: When done correctly, this is the most secure method. The poles are locked in place and will not move, even during vigorous activity or if you have to navigate through thick brush.
• Protection: The poles are held against the main body of the pack, protecting them from side impacts.
• Balance: A symmetrical carry on the back of the pack maintains your center of gravity, which is not always the case with side-carry methods.

Cons:

• Slow Access: This method is not designed for speed. Attaching and detaching the poles requires you to stop and likely take your pack off. It is not an "on-the-fly" solution.
• Potential for Snagging: Because the poles are on the back of the pack and the tips point upwards, they can be prone to snagging on low-hanging tree branches. This is a serious consideration when bushwhacking or hiking in dense forests.

Imagine you are on a multi-day trip. You have a long walk on a paved road to reach the actual trailhead. This is the perfect scenario for the Twin Loop System. You can attach your poles securely and forget about them until you reach the dirt path. Conversely, if you are on a trail that constantly alternates between steep climbs and technical scrambles, the time it takes to stow and deploy your poles this way would become a frustrating bottleneck. For such varied terrain, we must consider a different approach.

Method 2: The 'On-the-Fly' Quick-Stow System

The rhythm of modern hiking, especially in disciplines like fastpacking and trail running, demands efficiency. Stopping to remove a pack to stow or retrieve poles can break momentum and cost valuable time. In response to this need, both pack manufacturers and hikers themselves have developed ingenious systems for 'on-the-fly' or 'quick-stow' access. These methods prioritize speed and the ability to access poles without taking off your pack.

These systems are not universal; they are often brand-specific or require a particular style of pack. However, the principles are worth understanding, as they can sometimes be mimicked with a little creativity.

Types of Quick-Stow Systems

1. Integrated Sleeves and Holsters: Some packs, particularly those designed for trail running and fastpacking, come with built-in attachment points designed for rapid use. A common design involves a loop on the shoulder strap and another loop or pocket near the bottom of the pack on the same side. This creates a diagonal carry across your back that is accessible without removing the pack.
   • How it Works: You collapse your poles (Z-poles are ideal for this due to their rapid collapse). You then reach back with one hand, guide the tips into the lower loop, and then reach up with the other hand to secure the handles into the shoulder strap loop. It takes practice to do this smoothly, but it can become a single fluid motion.
2. The "Quiver" Concept: Popularized by brands like Salomon, a "quiver" is essentially a separate, lightweight sleeve that attaches diagonally to your pack. You simply slide the collapsed poles into the open top of the quiver.
   • How it Works: The quiver is positioned for an over-the-shoulder draw, much like an archer's quiver of arrows. You reach back over your shoulder, grab the handles, and pull the poles out. To stow them, you perform the reverse, guiding them back into the wide opening. This is arguably the fastest system available.
3. Under-the-Arm Carry: Some packs feature horizontal straps and loops that allow you to secure poles under your arm along the side of the pack.
   • How it Works: The poles are stowed horizontally. This keeps them out of the way of overhead branches and makes them very easy to grab. However, it can sometimes interfere with your natural arm swing.

Analysis of the Method

The primary virtue of any quick-stow system is speed. The ability to transition from using poles to having free hands in a matter of seconds is a significant advantage on varied terrain. Think of a trail that involves a short but steep rock scramble. You need your hands for balance and to hold onto the rock. With a quick-stow system, you can secure your poles just before the scramble and deploy them again right after, without ever breaking your stride or taking off your pack.

Pros:

• Exceptional Speed: Poles can be stowed or deployed in seconds.
• Maintains Momentum: You do not need to stop hiking to access your poles.
• Safety on Technical Terrain: Allows for rapid freeing of hands when needed for balance or climbing.

Cons:

• Less Secure: These systems generally offer less security than the classic twin loop method. Poles may rattle or shift more.
• Pack Specificity: Many of these systems are proprietary or only work well with specific types of packs, often lighter-weight models. A larger Travel Bag designed for travel might not have these specialized, athletic features.
• Practice Required: Using these systems effectively requires coordination and practice. Fumbling to stow a pole while tired can be frustrating.

Even if your pack does not have a dedicated quick-stow feature, understanding the concept can inspire improvisation. A simple loop of shock cord on your shoulder strap combined with a side pocket can sometimes be used to mimic a more integrated system. This type of problem-solving is at the heart of becoming a proficient outdoorsperson. For those interested in a more detailed breakdown of various attachment techniques, there are complete guides available that explore these nuances further.

Method 3: The A-Frame Carry

The A-Frame method is a robust and stable technique that utilizes the side compression straps of your backpack. It gets its name from the shape the poles create when attached—an inverted "V," resembling the letter "A." This method is an excellent alternative when you do not have or do not wish to use the classic twin loop system, or when your pack's side pockets are already occupied, perhaps with water bottles or tent poles.

Step-by-Step Instructions

As always, begin by fully collapsing your trekking poles. The shorter they are, the more stable the carry will be.

1. Prepare the Straps: Loosen the upper and lower compression straps on both sides of your backpack. You need enough slack to easily slide the poles behind them.
2. Attach the First Pole: Take one collapsed pole and slide it behind the compression straps on one side of the pack. The pole should be held vertically. Position it so that roughly equal lengths of the pole extend above the top strap and below the bottom strap. The handle is typically at the top, and the tip is at the bottom.
3. Attach the Second Pole: Repeat the process on the other side of the pack with the second pole. You now have one pole secured on each side of the pack.
4. Create the 'A' and Cinch Down: Bring the top ends of the poles (the handles) together above the top of your pack so they touch or cross. Secure them together with their built-in wrist straps or a separate Velcro tie or rubber band. This creates the apex of the "A." Now, go back to your compression straps. Systematically tighten all four straps—the upper and lower ones on both sides. As you tighten them, they will clamp down securely on the poles, pressing them firmly into the sides of your pack. The poles should be completely immobilized.

Analysis of the Method

The A-Frame carry creates an exceptionally stable, triangulated structure. The forces are distributed evenly, and the poles effectively become part of the pack's frame. This method is particularly favored by backcountry skiers for carrying skis, which demonstrates its inherent stability for long, rigid objects.

Pros:

• High Stability: The triangulation and pressure from four separate straps make this method very secure. There is minimal chance of rattling or shifting.
• Good Clearance: The poles are held tight to the sides and top of the pack, which often keeps them clear of both overhead branches and trailside brush.
• Versatility: This method works on almost any pack that has two pairs of side compression straps, which is a very common feature on everything from daypacks to large expedition packs. It is a feature you would expect on a quality Multifunctional Travel Bag.

Cons:

• Wide Profile: The A-frame can make the top of your pack wider, which could be a minor issue in very narrow spaces, like squeezing through a slot canyon.
• Access to Pack: The poles and straps cross over the main access zipper or opening for many top-loading packs. This means you may have to partially disassemble the A-frame to get into the main compartment of your pack. This is a significant consideration.
• Moderate Speed: It is faster than the classic twin loop method but slower than a quick-stow system. It still generally requires you to stop and use both hands.

Consider a scenario where you are hiking in open, alpine terrain. You have a long, non-technical ridge to walk, and you want your poles out of the way. Your side pockets are holding 1-liter water bottles. This is an ideal situation for the A-Frame carry. It provides rock-solid security and will not interfere with your access to water. The stability it provides gives peace of mind, allowing you to focus on the miles ahead.

Method 4: The Vertical Side-Pocket Carry

This is perhaps the most intuitive and commonly used method for a temporary trekking pole attachment to backpack. It is simple, fast, and uses two of the most common features on any modern hiking pack: a side pocket and a compression strap. It combines the functions of these two features to create a straightforward vertical attachment system on the side of the pack.

Step-by-Step Instructions

This method is beautifully simple. Again, start with your poles collapsed.

1. Bundle the Poles: Hold your two collapsed poles together as a single unit. You can use the Velcro ties that often come with poles, or simply wrap their wrist straps around each other to keep them from separating.
2. Pocket the Tips: Locate a stretch side pocket on your backpack. Drop the tips of the bundled poles into this pocket. Push them down until they are firmly seated at the bottom.
3. Secure the Shafts: Identify the side compression strap located above the pocket. On most packs, there is at least one. Bring this strap around the shafts of both poles. Cinch it down tightly. If there is a second, higher compression strap, use that as well for added stability. The poles should now be held vertically against the side of your pack, anchored at the bottom by the pocket and at the top by the strap.

Analysis of the Method

The beauty of this method is its simplicity and speed. It requires minimal thought and can be performed very quickly, making it great for short transitions where you need your hands free. However, its simplicity can also be its downfall if not done with care.

Pros:

• Fast and Easy: This is one of the quickest ways to stow poles, second only to dedicated 'on-the-fly' systems. It is perfect for short, unexpected scrambles or for stopping to read a map.
• Good Accessibility: Because the poles are on the side, they are often easier to grab than if they were on the back of the pack. With practice, some people can even access them without taking the pack off.
• Keeps Pack Profile Slim: The poles are held tight to the side, adding no extra width or height to your overall silhouette.

Cons:

• Potential for Imbalance: Attaching both poles to one side of the pack adds weight asymmetrically. While the weight of two poles is not huge, over a long day, this slight imbalance can lead to muscle fatigue and soreness in your shoulders and back. It is a subtle ergonomic issue that can have cumulative effects (Holewijn & Meen, 1991). For this reason, if using this method for a longer duration, it's better to split the poles, putting one on each side.
• Security Issues: The security of this method depends heavily on the depth of the side pocket and the quality of the compression strap. In a shallow pocket, the poles can pivot and swing, or even bounce out on rough terrain.
• Wear and Tear: The carbide tips of your poles can be abrasive. Over time, repeatedly placing them in the same spot in a mesh side pocket can lead to holes and tears. Some high-end packs from manufacturers like reinforce the bottom of these pockets for this very reason.

This method is the pragmatic choice for the hiker on rolling terrain. You climb a steep section, pole tips digging in, then the trail flattens out for a quarter-mile. You quickly bundle your poles, slide them into the side pocket, cinch the strap, and walk on, hands-free. When the next climb begins, the process is reversed just as quickly. It is a method that values efficiency over absolute security.

Improvisational Solutions for Any Pack

What happens when your backpack is not a feature-rich hiking model? Perhaps you are using a simple bookbag, a stylish Laptop Backpack, or an older pack that lacks dedicated attachment points. Does this mean you must resign yourself to carrying your poles in your hands all day? Absolutely not. With a little ingenuity and a few common items, you can create a secure trekking pole attachment to backpack on almost any piece of gear.

The Minimalist's Toolkit

A few small items can dramatically expand your options. Consider adding these to your repair kit:

• Voile Straps or Ski Straps: These are incredibly strong, slightly stretchy polyurethane straps with a simple buckle. They are arguably one of the most useful multi-purpose items a hiker can carry.
• Shock Cord (Bungee Cord): A few feet of 1/8-inch shock cord and a couple of mini cord locks weigh almost nothing and can be used to create custom attachment loops.
• Carabiners: A lightweight, non-climbing-rated carabiner can be a useful connector.
• Velcro Ties: Reusable and simple.

Improvised Method 1: The 'X' Carry with Voile Straps

This method creates a very secure carry on the back of a pack that has any kind of vertical webbing, like a daisy chain or even just a haul loop.

1. Collapse and bundle your poles.
2. Lay them diagonally across the back of your pack.
3. Take a Voile strap and thread it through a daisy chain loop or around a shoulder strap anchor point near the top of the pack. Wrap it tightly around the upper shafts of the poles.
4. Take a second Voile strap and thread it through a loop near the bottom of the pack on the opposite side. Wrap it tightly around the lower part of the poles.
5. The two straps will form an "X," holding the poles diagonally and under high tension. This is extremely secure.

Improvised Method 2: Creating Your Own Loops

If your pack has absolutely nothing to attach to, you can sometimes create your own system.

1. Lower Loop: You can often loop a length of cord or a Voile strap through the point where the shoulder straps connect to the bottom of the pack. This creates your lower anchor.
2. Upper Loop: The haul loop at the top of the pack (the webbing handle you use to pick it up) can serve as your upper anchor point.
3. Combine these two improvised points to attach the poles vertically, similar to the classic twin loop method.

The Role of a Versatile Pack

This need for improvisation highlights the value of choosing the right pack from the outset. While a specialized 17 Inch Laptop Backpack is perfect for its intended purpose, its design prioritizes protecting electronics over carrying external gear. In contrast, a Multifunctional Travel Bag or a dedicated hiking pack from a quality manufacturer is designed with this versatility in mind. Companies in the textile and sporting goods manufacturing space, such as Decortec Co., Ltd. and , build their products based on an understanding of these varied user needs. When selecting a pack, examining the quantity, quality, and placement of its external straps and loops is just as important as checking its internal volume. A little foresight when purchasing a pack can save a lot of trouble on the trail.

The ability to improvise is a critical skill. It reflects a deeper understanding of the principles of load stability and allows you to adapt to any gear combination or situation you might face.

Frequently Asked Questions (FAQ)

Q1: Can I attach my trekking poles to a small daypack or a Waist Bag? It depends on the features of the pack. Many hiking-oriented daypacks include at least side pockets and a compression strap, making the Vertical Side-Pocket Carry (Method 4) possible. Some even have minimalist loops for the Classic Twin Loop System (Method 1). For a Waist Bag, it is generally not feasible or safe to attach full-size trekking poles, as they are too long and would create a significant imbalance and snagging hazard.

Q2: What is the best method for air travel? For air travel, poles must be stored inside your checked luggage. Airlines do not permit them as carry-on items. When packing them, collapse them to their shortest length and use their rubber tip protectors. If you can, pack them within the frame or against the back panel of your main Travel Bag to protect them from being bent.

Q3: My poles don't collapse (they are fixed-length). How can I attach them? Attaching fixed-length poles is very challenging and generally not recommended. Their length makes them extreme snagging hazards. The A-Frame Carry (Method 3) is the most viable option, as it keeps the poles relatively contained. However, they will likely project high above your head and well below your pack, making them dangerous in forests or on scrambles. If you frequently need to stow your poles, investing in collapsible models is a significant safety and convenience upgrade.

Q4: Is it better to store poles with the tips pointing up or down? The safest and most common practice is to have the tips pointing down when stowed. However, the Classic Twin Loop System (Method 1) results in the tips pointing up. In this case, it is absolutely essential to cover the sharp carbide tips with the rubber protectors that came with your poles. This prevents them from injuring someone behind you, snagging on branches, or damaging your gear if you fall backward. For all other methods (A-Frame, Side-Pocket), the tips should be oriented downwards.

Q5: Will attaching poles to my backpack damage the pack? Over a long period, it is possible. The most common point of failure is the mesh of side pockets, which can be abraded by the pole tips. To mitigate this, always use your rubber tip protectors if you are stowing poles in a mesh pocket. Regularly inspect all straps, loops, and buckles for signs of fraying or stress, especially where they make contact with the poles. A high-quality backpack from a reputable backpack manufacturer will use durable materials, but preventative care is always wise.

Q6: What about magnetic attachment systems? Some niche products and DIY solutions use powerful magnets to create a quick-stow system. While innovative, they have significant drawbacks. They can be unreliable if knocked, potentially causing a pole to fall unexpectedly. Furthermore, powerful magnets can interfere with navigational equipment like a traditional compass and potentially damage electronic devices. For reliability and safety, mechanical systems (straps, loops, and pockets) remain the standard.

Final Considerations on Mastery and Practice

The act of attaching trekking poles to a backpack is more than a simple chore; it is a dialogue between the hiker, the gear, and the environment. Each method we have discussed—the secure Classic Twin Loop, the swift Quick-Stow, the stable A-Frame, and the simple Side-Pocket carry—is a different response to the demands of the trail. There is no single "best" method, only the method that is most appropriate for the moment.

Mastery comes not from memorizing the steps, but from understanding the underlying principles of stability, accessibility, and safety. It comes from practicing these techniques not in your living room, but on the trail, when you are tired and the weather is changing. Can you perform the A-Frame carry with cold fingers? Can you smoothly stow your poles using a quick-stow system as you approach a scramble, without breaking your rhythm?

This practical skill, once honed, fades into the background, becoming an effortless part of your hiking craft. It frees your hands when you need them and your mind from the distraction of rattling, swinging gear. It allows your equipment to become a seamless extension of your will, enabling you to move through the natural world with greater confidence, safety, and grace. The thoughtful selection and use of your gear, from the Promotional Gift Bag you might use in the city to the technical Traveler Backpack on the mountain, reflects a commitment to moving with purpose and efficiency.

References

American Hiking Society. (n.d.). Hiking 101. Retrieved February 26, 2026, from

Holewijn, M., & Meen, M. (1991). The effect of a backpack on the metabolic and cardiovascular responses to submaximal walking. Ergonomics, 34(7), 951–957.

Jacobson, B. H., & Wright, T. (2009). The role of trekking poles in eccentric and concentric muscle fatigue in young and older adult hikers. Journal of Sports Medicine and Physical Fitness, 49(1), 17–22.

REI Co-op. (2024). How to use trekking poles. Retrieved February 26, 2026, from

Sawyer, M. (2023). The complete guide to trekking poles. Backpacker. Retrieved February 26, 2026, from

nickmistrettacopywriting.com

youcco.com